- Design Comparison
- Cleaning Performance Comparison
- Battery Comparison
- Feature Comparison
- Quick Rundown Of iRobot Roomba i4
- Quick Rundown Of iRobot Roomba i4+
- Product Videos
Roomba i4 and Roomba i4+ both measure 13.34 x 13.26 x 3.63 inches and weigh 12 pounds.
Cleaning Performance Comparison
Suction Power & Noise
Both have a suction power of 1800 Pa and a noise level of 68 dba.
Robot’s ability to walk
Both have a cleaning area of 185 m2.
Thanks to the 20 mm (0.78 in) climbing ability, both of them are suitable for thicker carpets and can easily overpass a door threshold (if below 2 cm).
Both robots are equipped with a bunch of sensors that prevent bumping into things, falling, and keeping them at a distance of 10 mm from walls and furniture.
iRobot Roomba i4 and Roomba i4+ both have dirt detection sensors. It is a system that recognizes high-traffic spots making a cleaner go over these zones a few times until it is clean
Roomba i4 and i4+ both have a waste bin capacity of 400 ml.
When the dustbin inside the Roomba i4+ gets full, the robot vacuum returns to the charging dock, the base sucks up the debris from the container. When the Roomba is done emptying, it returns to continue cleaning.
iRobot Roomba i4 can’t empty itself when it’s filled with dirt, it will stop cleaning and notify you when the bin needs emptying.
The Roomba i4 has been designed to work with iRobot’s Auto Clean Base® technology. But then it doesn’t come with the Clean Base® Automatic Dirt Handler, so you’ll have to buy it separately.
Under the lids of both dustbins, there is a HEPA filter that makes the robot safe for people with allergies and asthma. The filters of both Roomba are not removable for washing, you should change the filter every three months.
Ability to suck and sweep
Carpet boost: Roomba i4 and Roomba i4+ have a sensor that can recognize carpets. When the vacuum is on the carpet, its suction power is increased to the maximum level automatically cleaning deeper.
Side brush: Both have a side brush made of rubber.
Unique Dual Multi-Surface Rubber Brushes don’t get tangled with pet hair. Brushes adjust and flex to stay in constant contact with carpets and hard floors.
Cleaning Brush: Both are equipped with a cleaning brush that has detachable tips and is easier to clean since hair mostly gets clogged around the edges. In addition, the newest brush has 250% more bristles providing a better pickup.
Ability to Mop the floor: Both devices can only sweep and vacuum
Both have a 2210 mAh battery capacity, can operate for about 100 minutes and take 120 minutes to charge.
If both vacuums don’t finish all the work on a single charge, it will automatically return to the charging dock. Resume intends that the robot will resume from where it left off after charging is complete. This feature is perfect for large households where the robot cannot clean the entire house on a single charge
Unlike robots that don’t have a map and move randomly until the battery runs out, Roomba navigate efficiently. It moves back and forth in straight lines methodically covering the cleaning area based on the map it generates.
Roomba i4 and roomba i4+ use iAdapt 2.0 sensors to establish the layout of your home
Roomba i4 and Roomba i4+ do not have the ability to store maps
Both only have basic scheduling features. You can only schedule it to work at a specific time and day of the week.
Roomba i4 and Roomba i4+ does not have a digital virtual wall creation feature but you can buy an additional virtual wall barrier to create a no-go zone
Manually control it like a radio car. If you need the device to go to a specific spot, you can use the app remote control and manage its movements by sending it where you want to. Also, with the «Target Point» option you can tap on the map, and the robot will go to that place. Much easier than using the remote control.
Additionally, you can control the two robot vacuums by setting voice prompts through Amazon Alexa Support and Google Assistant Assistant.
When Roomba finishes cleaning, you can view the results in the cleaning history. Both cannot be tracked in real-time, you cannot see its location while the robot is vacuuming.