- Design Comparison
- Cleaning Performance Comparison
- Battery Comparison
- Feature Comparison
- Quick Rundown Of iRobot Roomba i3+
- Quick Rundown Of iRobot Roomba J6+
- Product Videos
Roomba i3+ measures 13.34 x 13.26 x 3.63 inches and weighs 15 pounds. Meanwhile, the Roomba J6+ measures 13.4 x 13.3 x 3.4 inches and weighs 18.72 pounds.
Cleaning Performance Comparison
Suction Power & Noise
Both have a suction power of 1800 Pa and a noise level of 68 dba.
Robot’s ability to walk
With a cleaning area of 175 m2, Roomba i3+ has a smaller cleaning area than Roomba J6+, with a cleaning area of 185 m2.
Thanks to the 20 mm (0.78 in) climbing ability, both of them are suitable for thicker carpets and can easily overpass a door threshold (if below 2 cm).
Both robots are equipped with a bunch of sensors that prevent bumping into things, falling, and keeping them at a distance of 10 mm from walls and furniture.
iRobot Roomba i3+ and Roomba J6+ both have dirt detection sensors. It is a system that recognizes high-traffic spots making a cleaner go over these zones a few times until it is clean
Roomba i3+ and J6+ both have a waste bin capacity of 400 ml.
When the dustbin inside the Roomba gets full, the robot vacuum returns to the charging dock, the base sucks up the debris from the container. When the Roomba is done emptying, it returns to continue cleaning. The base holds up to 30 robot bins, so you don’t have to empty it for about a month.
Under the lids of both dustbins, there is a HEPA filter that makes the robot safe for people with allergies and asthma. The filters of both Roomba are not removable for washing, you should change the filter every three months.
Ability to suck and sweep
Carpet boost: Roomba J6+ and Roborock S4 Max have a sensor that can recognize carpets. When the vacuum is on the carpet, its suction power is increased to the maximum level automatically cleaning deeper.
Side brush: Both have a side brush made of rubber.
Unique Dual Multi-Surface Rubber Brushes don’t get tangled with pet hair. Brushes adjust and flex to stay in constant contact with carpets and hard floors.
Cleaning Brush: Both are equipped with a cleaning brush that has detachable tips and is easier to clean since hair mostly gets clogged around the edges. In addition, the newest brush has 250% more bristles providing a better pickup.
Ability to Mop the floor: Both devices can only sweep and vacuum
With 1800 mAh Lithium-Ion, Roomba i3+ can operate for about 75 minutes and takes 90 minutes to charge. Roomba J6+ uses a Lithium-Ion battery with a capacity of 2210mAh that can work for about 100 minutes and takes 120 minutes to fully charge.
If both vacuums don’t finish all the work on a single charge, it will automatically return to the charging dock. Resume intends that the robot will resume from where it left off after charging is complete. This feature is perfect for large households where the robot cannot clean the entire house on a single charge
Unlike robots that don’t have a map and move randomly until the battery runs out, Roomba navigates efficiently. It moves back and forth in straight lines methodically covering the cleaning area based on the map it generates.
Roomba J6+ uses a camera sensor to map your home layout; the Roomba i3+ uses a gyroscope + optic motion tracking sensor. The camera suffers in dark rooms.
Roomba i3+ cannot store maps in memory. Roomba J6+ can store 10 different maps in memory.
The Roomba i3+ only has basic scheduling features. You can only schedule it to work at a specific time and day of the week.
Roomba J6+ has an advanced scheduling feature. After mapping, you can divide the map into separate regions and give each area a name. With this feature, you can schedule cleaning by area, no-go zone, selected room cleaning, schedule, etc.
Roomba i3+ does not have a digital virtual wall creation feature but you can buy an additional virtual wall barrier to create a no-go zone.. meanwhile, Roomba J6+ is equipped with a digital virtual wall creation feature that helps create a no-clean zone, Zoned cleaning.
Zoned cleaning: The robot cleans within a particular zone
No-Go zone: keeps the Roomba off some zones
Room cleaning: can be ordered (or scheduled) to clean in a certain room or two.
Manually control it like a radio car. If you need the device to go to a specific spot, you can use the app remote control and manage its movements by sending it where you want to. Also, with the «Target Point» option you can tap on the map, and the robot will go to that place. Much easier than using the remote control.
Additionally, you can control the two robot vacuums by setting voice prompts through Amazon Alexa Support and Google Assistant Assistant.
When Roomba finishes cleaning, you can view the results in the cleaning history. Both cannot be tracked in real-time, you cannot see their location while the robot is vacuuming.
Quick Rundown Of iRobot Roomba i3+
Quick Rundown Of iRobot Roomba J6+